License Plate Relocation.





OBXboost

Registered
I added a UFO undertail on my '06 LE and I don't want to keep the plate underneath. Can someone point me to some areas to look at as far as a custom mount BOLT ON bracket is concerned?
 

MC MUSTANG

Peace Keeper or Ban Hammer-it's up to you; IDMBT#9
Staff member
Administrator
Registered
Two popular ones are the swingarm relocator/chain guard by ST Machine that mounts the tag vertically from where the chain guard mounts and the G3 relocator that mounts to the rear axle... there is one for sale here on the auction site
Auction link
and I think there is even a raffle.

Hope this helps...
 

BigBSBusa

Comin' back stronger than ever!
Donating Member
Registered
If you do a search for plate relocator or tag holders you will come up with lots of stuff. If you aren't going to put it underneath the tail you only have a couple options. They are all easy bolt-on things either on the passenger rearset or the swingarm.
 

rockadaous

mod-a-holic
Donating Member
Registered
G3 is about the best for your $$$$
as you can see real easy to install and very clean...
post-3-94633-dsc03937.jpg
 

OBXboost

Registered
I know everyone is recommending the G3, but it just doesn't do it for me. Can anyone recommend anything else?
 

BiG-T

Donating Member
Registered
(OBXboost @ Oct. 02 2006,17:14) I know everyone is recommending the G3, but it just doesn't do it for me.  Can anyone recommend anything else?
How about a G2?  
rock.gif
 

InfiniteReality

Registered
IMO G2 looks better. Less clutter on that side of the bike and breaks it up a bit. I've had both and like the G2 better. No quite as easy to install, but was worth it IMO. BTW I have a UFO as well.
smile.gif
 

jimzu

Registered
I also have an 06 LE. I have a TMH undertail. I did not want to drill it. I did not like the look of side mount tag brackets (disproportionate). And it's illegal for vertical mounted brackets (although I've had them in the past).

Check page 1 in my build thread. It's very easy and cheap to fab up a bracket to hang off the two rear-most undertail bolts. Looks OEM. With my extended arm, I simple bent the plates a little further.

http://www.suzukihayabusa.org/forum/index.php?topic=74503.0
 

guido4512

Donating Member
Registered
Check out the tag holder I made for my wifes gixxer with integrated CF look turn signals....

Added: oh, I reread yer post and you Don't want the tag underneath ... Nevermind.
laugh.gif
biggrin.gif


DSC00613.JPG
 

Burger King

breakin' the law
Donating Member
Registered
(jimzu @ Oct. 13 2006,11:04) I also have an 06 LE. I have a TMH undertail. I did not want to drill it. I did not like the look of side mount tag brackets (disproportionate). And it's illegal for vertical mounted brackets (although I've had them in the past).
It must depend on the state you live in. Nothing in the Georgia code says that it can't be vertical or that it has to be horizontal.
It only has to be plainly visible.

I've had 3 leos look at mine and tell me it was fine. Two of them told me how good they thought it looked vertical on the swingarm and one stopped me because he thought I didn't have a tag. Once he saw it he apologized for stopping me.
tounge.gif
 

frisbee

GODSPEED RACING
Donating Member
Registered
I don't think the guy makes mine anymore I got it awhile ago . It even has the lights for the plate so I don't get hastled. and I have TMH undertail also. I think you could get someone to make this design pretty easy. It was supposed to go on the other side but I put a spacer on it so it would fit this side.

ert.JPG
 

frisbee

GODSPEED RACING
Donating Member
Registered
If it looks like something you are interested in I can take more pics. its just a piece of Aluminum thats cut and then bent.

df.JPG
 

thebbbusa

Donating Member
Registered
I don't think the guy makes mine anymore I got it awhile ago . It even has the lights for the plate so I don't get hastled. and I have TMH undertail also. I think you could get someone to make this design pretty easy. It was supposed to go on the other side but I put a spacer on it so it would fit this side.[/Quote]

Nope, I don't make them anymore.  At least not yet.
 

Similar threads





Latest Bikes

Forum statistics

Threads
172,002
Messages
3,074,534
Members
47,314
Latest member
Guardcasey
Top