King of the dyno!





ks-waterbug

Group Buy Guy
Donating Member
Registered
#1
Can't help but wonder who has the badest bike on this board? I have some predictions, but know real proof. Everyone knows the proofs in the pudding. So post some numbers (horsepower). I want to know what my bike could be like when it grows up.
 

ks-waterbug

Group Buy Guy
Donating Member
Registered
#5
If it makes either of you feel any better, I would gladly take the lower of the two figures. Mines still pretty much stock!
 

MET

The Watcher
Registered
#11
Well mine has been posted @ 284.5 142 torque in the past.  I know that I am about 300hp now based on all my read outs on the gauges.  8lbs of boost only.  I wil be putting on the Dyno again soon but expect 295-305hp, and about 149 torque.

OLD last October
NinjaEater8.jpg
 

jwcfbd

Administrator
Registered
#12
jwc - what's the difference in the two curves?  Just tuning?  and with what?
Sorry I left that out. When I first bought my bike I had to wait until they did the cam chain tensioner recall on it before I could take delivery of it. I later found out that when they did the recall they had put the chain on one tooth off. Once it was corrected I got a 30hp gain.
 

Doc_Busa

Donating Member
Registered
#13
Well mine has been posted @ 284.5 142 torque in the past.  I know that I am about 300hp now based on all my read outs on the gauges.  8lbs of boost only.  I wil be putting on the Dyno again soon but expect 295-305hp, and about 149 torque.

OLD last October
NinjaEater8.jpg
Rut Row... NinjaEater, what turbo system are you running? Also, do you have stock pistons?

Thanks
 

Doc_Busa

Donating Member
Registered
#14
BTW, the most impressive thing, for me, in NE's dyno sheet is NOT the peak HP at 284.4, IT IS THE 250+ HP at 6k RPM!!!!! DAMMMMNN!!!!

Compare that to the nearly stock Busa above which appears to be around 60 HP at that RPM!!!!

Dat's what I'm talkin' about!!!!

spank.gif
 
#15
Doc, the lower graph is the horsepower..........git yer glasses out....................haha. It pulling a 150 horses same as ours...............well mine is one horsepower more than yours but.....who's counting..................use the lower graph and read the numbers on the left side for horse power and then read the top graph and use the numbers on the right side for torque.
 
#19
Ninja.......er looking at the dyno sheet..........your using the lower graph (top half of sheet) as horse power right...........cuz that's the one..................to use............DragBikeCentral Images Missing

Note: It says 8 lbs of boost on Dyno sheet actual boost is 7.5.........don't know why............DragBikeCentral Images Missing
 

Similar threads





Most likes - Past 7 days

Latest Bikes

Forum statistics

Threads
171,648
Messages
3,066,036
Members
47,188
Latest member
DOE BOY
Top