Ive been told I cant use pazzos on genII

GSXTacy

Mr. January
Donating Member
Registered
Does anyone run aftermarket levers on there gen II with risers. Ive been told pazzo's work work on my 08 if I have a 1 3/4 inch rise. Anyone?
 
With out risers, they will work, but with any rise i don't think so!
 
Only one way to tell. I'd talk to pashnit or pazzo direct though. They did redesign the perch but with a riser it seems to be a crapshoot since stock geometry has changed.
Posted via Mobile Device
 
Chris, possibly the best person to answer this is someone that has risers too.

The issue we talked a lot about Pazzos back in 2009 for them touching the fairing on the right side has been fixed with a new lever issued just for the 2008+ busa. You can also retrofit a Gen-I pair of pazzos to fit the new 08+ with a simple $40 replacement part.

Other bit of advice is once they are on there, is loosen up the levers and rotate up-down & in-out to find the best clearance if you feel it's an issue when you get them installed.

This is the part that made the pazzos finally fit the 08+.
Img_8704_F41_perch_800.jpg

Img_8704_F41_perch_800.jpg
 
"Bump" For for the GEN II peeps running risers and Pazzo's, do they hit? ???
 
Mine work perfect! They dont even come close to touching.

Pazzo shorty's
Heli Bars
Zero Gav DB
Throttle Meisters
heated grips


Nov-09 047.jpg
 
Last edited:
Mine work perfect! They dont even come close to touching.

Pazzo shorty's
Heli Bars
Zero Gav DB
Throttle Meisters
heated grips

The Heli's don't have as much rise as 1 1/4" spacers do? Or do they? ???
 
I have a soupys 1 inch block on mine and they clear after minor adjustments.
 
I have a 3/4 Genmar riser and helibars GEN II no issues does not touch.
 
Back
Top