Iron rotors




afterhours

Registered
it looks like ass when they rust up...this happens really fast too.

if looks are an issue for you, it will frustrate the hell out of you.
 

TruWrecks

Banned
They would do very well with ceramic pads, if you can keep them hot enough. I did that setup on a car and I didn't like it on the street. The brakes didn't grab very well until they were glowing hot. The lack of break dust was nice though. On a track it was great.

Unless you are running a really aggressive pad on the street, I wouldn't bother going with iron rotors. The OEM, Galfer and EBC with sintered pads will give you more than you need for street riding.
 

turbobusa2000

Registered
They would do very well with ceramic pads, if you can keep them hot enough. I did that setup on a car and I didn't like it on the street. The brakes didn't grab very well until they were glowing hot. The lack of break dust was nice though. On a track it was great.

Unless you are running a really aggressive pad on the street, I wouldn't bother going with iron rotors. The OEM, Galfer and EBC with sintered pads will give you more than you need for street riding.

Thanks for your thoughts. I've decided a set of Brembo HP's will do the trick.
 



Latest Bikes

Forum statistics

Threads
172,731
Messages
3,089,526
Members
47,630
Latest member
derekbenade
Top