Idle adjustment mod

[BusaSamurai]

Problems with idle not staying adjusted here is the Right way to do it with out glue ,silicone or another nut..
Go to the Stealer ship and ask for part #13270 And #13279 it is the adjusting screw and extension and bracket from a 2000 Busa it will bring the adjustment screw out beside the right side fairing and you can adjust while sitting at a red light without tools . but since i have done mine and set it . It has not moved i guess the longer screw and spring keep it tight. For some reason they changed the Design after 2000 ..

 Heres some pics.. More at bottom of posts. The brackets bolts to a factory hole that is for this application . For somreason they did away with the extension but still drill and tap hole for it..



<!--EDIT|BusaSamurai
Reason for Edit: None given...|1156362104 -->

 

[BiG-T]

Price? And thanks for the tip.

 

[BusaSamurai]

Price?  And thanks for the tip.

My stealer ship its 38.00 for all but if you ask you usually can get a 10% discount ..

 

[ranman]

likeing that thinks for the tip

 

[omslaw]

Wonder what vman can do for us??

 

[vman1300]

Your stealership is actually your friend. They are selling below MSRP on those two items.

They retail for $37.10 and $5.51. Plus with an additional 10% from that you are close to mail order price.

I can ship both items anywhere in the US for $39.00.

Let me know if I can help.

Kevin

 

[Over_Easy]

That's one expensive screw...proprietary.

 

[vman1300]

It is more than just a screw. It is reference 24 on this screen.

 

[nitrousjunkie]

Could someone post up an actual shot of the things mounted on the bike please,Thanks,NJ.

 

[vman1300]

Could someone post up an actual shot of the things mounted on the bike please,Thanks,NJ.

Mine is in the shop in Charlotte at Lee's or I would be glad too my friend.

 

[nitrousjunkie]

Could someone post up an actual shot of the things mounted on the bike please,Thanks,NJ.

Mine is in the shop in Charlotte at Lee's or I would be glad too my friend.

No problem Kevin,I know Nathan and a few others have this done,I have 2 of the kits,just cant figure where the bracket actually mounts.NJ.

 

[BusaSamurai]

Will take a picture when i get to the house.About 330 pm eastern time..

 

[BusaSamurai]

Another pic not the best camara fairing is pulled away from bike that is why there is a gap.



<!--EDIT|BusaSamurai
Reason for Edit: None given...|1156361988 -->

 

[BusaSamurai]

Another pic



<!--EDIT|BusaSamurai
Reason for Edit: None given...|1156362074 -->

 

[BusaSamurai]

Another pic

 

[BiG-T]

OH!! I've seen that installed before...never knew what it was.

Thanks!

 

[BusaSamurai]

I have done alot of mods to my bike and this byfar was one of the best.For the price when I got the bike new I kept having to adjust it and a friend of mine had a 2000 model . So I figures i would try . And it works great...

 

[omslaw]

Your stealership is actually your friend. They are selling below MSRP on those two items.

They retail for $37.10 and $5.51. Plus with an additional 10% from that you are close to mail order price.

I can ship both items anywhere in the US for $39.00.

Let me know if I can help.

Kevin

OK, Kevin - Hook me up with one of those setups.

PM sent!

 

[Over_Easy]

Is it a flexible device (looks like it's winding from the diagram above)?

 

[BusaSamurai]

Is it a flexible device (looks like it's winding from the diagram above)?

Yes it is almost like heavy duty spring