icemann help scorpio

[wht_scorpion]

hello guys I need input I have a 06 busa I have leds rear tail light with resistors in the wiring I got the SUZ-1 wiring harness from scorpio I plug the harness in to the rear stock harness now I have 2 grey wires I have to tap in to the left and right singals do i tap the power wires before the resistors in the pics I have a black and grey connects is this where i put the grey wires from the scorpio harness to or after right to the resistors thanks

 

[dadofthree]

Before the resistors

 

[wht_scorpion]

so do you think i should tap the 2 red wires they run to the resistors

 

[wht_scorpion]

or before the grey and black connectors

 

[wht_scorpion]

the black connector has a teal wire and a black with white stripe
and the grey connector has a soild black wire and a black and white stripe

 

[wht_scorpion]

I went with the red wires it work great scorpio alarm thanks guys

 

[BusaWizard]

I'd get rid of those quick connects and solder all your connections.

 

[wht_scorpion]

i will this winter