I Broke My Maf When I Took Out My Air Box

Leepeter1975

Registered
Hi ive just had my hayabusa 2002 rebuilt after the clutch pushrod seal leaked. Its not run right and is using a lot of fuel after a few days pinned it down to the maf. Question is the nipple on the maf have a hose running from it and if it does where is it coming from. Mine is broken of and cant find out any info
 
The nipple attaches to vacuum lines going to the lower bottom side of the throttle bodies on my gen 2
 
Here's a diagram that should explain how the maf sensor is connected.
I believe It's called the IAPS in the diagram the 02 busa, will have an in tank fuel pump, so you won't have that vacuum hose (that goes to the fuel pump regulator) shown 't' ing off from the throttle body/IAPS vacuum hose, on your one.

image.jpeg
 
Last edited:
I broke mine taking off my airbox for the first time. Picked one up from ebay and couldn't ride until I replaced it.
:banghead:

Intake Air Pressure Sensor?
 
Back
Top