HOW TO WELD SLIPPER CLUTCH?

[OB_Dirty Pete]

Can anyone describe to me how to stop the clutch grabbing without going to the Schnitz solution?

I have heard others talk about "welding the dogs," but I would like to KNOW what to do before I get into exploratory surgery.

Any info much appreciated.

[This message has been edited by Dirty Pete (edited 15 September 1999).]

 

[OB_Yngve]

Dirty Pete: U have to weld the clutch drive cam to the clutch driven cam ( part number 21610-02F12 ). You have to make sure they are paralell to eachother other than that its just go ahead and fire up the old Lincoln arc welder and do it. After U have done it U have to either put new spring in the clutch or put a washer ( or several ) to stiffen up the springs. Easy Peasy..........
Even an American can do it so why not a Canadian ? heheheeheh

 

[OB_KawAbuser]

Yngve, what are you trying to say?

Is that reliable Lincoln arc welder made in the old USA by any chance?

 

[OB_Dirty Pete]

Thank you very much, Yngve.

 

[kyote1]

Is this mod better fro just street riding?

 

[AsleepAtTheTree]

Does this have to be tig welded or can be mig welded???

 

[Bumblebee]

Does this have to be tig welded or can be mig welded???

The original post is from 1999 and the only post since was in 2011...don't hold your breath for anyone active in this thread to respond....