how to Installing a PC IIIr

starre

Registered
Hello. Does anyone know if there is a movie about how to Instal a Power Commander IIIr to a Hayabusa 06 i Have a little trouble finding where to connect the small contacts, see the image. Grateful for the help. Regards Staffan. sladdar_1.jpg

sladdar_1.jpg
 
Some GSX-R's and Busas run like poo with the timing hooked up on the PCIIIr. The signal is weak at low rpm so the trigger and sensor need to be shimmed closer to each other. Sometimes that helps the low rpm ignition signal. If the bike runs erratically at low rpm try removing the ignition signal from the loop (simply unplug those ignition leads from interrupting the bike's stock connectors and plug the bike's connectors back together) and you will experience better low rpm operation.
 
Back
Top