How to install levers?

[Fonzi]

I have been searching all over the .org to see a how-to video or instructions on how to change out the brake and clutch levers. I will buy the Speedmetal shortys and want to know if I have to take the master cylinder off or is it just one bolt? Please advise.lease:

 

[RedHerring]

IM inbound.

 

[twotonevert]

Its really easy. You need to make sure you have the pivot bushing or whatever the brass piece is called installed on the new lever.

Sent from my DROIDX using Forum Runner

 

[lankeeyankee]

One bolt and nut. lefty loosie, righty tighty

 

[Sum Beach]

One bolt and nut. lefty loosie, righty tighty

Yep, that about sum's it up on how easy it really is.

 

[mr8ball]

One bolt each side 5 minute job at the most

 

[Ludicrous Speed]

Perhaps the easiest Mod you will ever make to your bike!

 

[dadofthree]

Easier than removing the reflectors

 

[Fonzi]

One bolt and nut. lefty loosie, righty tighty

Thanks all for the input i jsut put them on and it was as simple as you said. I had forgot the last part

 

[RedHerring]

Taking off the reflectors was a real pain. I had to use a magnet on a string to fish the loose nut that i lost out of the tail bodywork.

Don't forget to make sure your brake lights work and your levers clear the bodywork from stop to stop.