Hmmm... $250 for this bracket

yamahor

DEAD MAN WALKING
Donating Member
Registered
So, I'm surfing ebay andd find <a href="http://cgi.ebay.com/ebaymotors/Hayabusa-chrome-BUSA-GSXR-1300-Plate-Tag-Bracket_W0QQitemZ170072612283QQihZ007QQcategoryZ3
5580QQrdZ1QQcmdZViewItem" target="_blank">THIS!</a> Look familiar anyone? GMbusa and I both run Very Similar setups...

Min was made in GMbusa's garage in about 10 minutes from a leftover Brakelight bracket. Had it to an unannounced speed multiple times, no problems... This guy wants $250 for a (albeit) thicker, chrome version... I'll stick with mine for now, thanks... Unless the someone on here wants to make one for a reasonable price... Group buy anyone?
 
all_coholic.gif
 
(yamahor @ Jan. 26 2007,00:44)
(Black Bird Killer @ Jan. 26 2007,00:39)
(yamahor @ Jan. 26 2007,00:34)
(Black Bird Killer @ Jan. 26 2007,00:30)
all_coholic.gif
WHats that for?
Guy is a little high on his price
Oh... I thought it might be a board member who would then kick my arse...


I day dream too much...
<span style='font-size:15pt;line-height:100%'>It's my auction. And now I'm coming after you</span>




laugh.gif
laugh.gif


laugh.gif
 
(Black Bird Killer @ Jan. 26 2007,00:47)
(yamahor @ Jan. 26 2007,00:44)
(Black Bird Killer @ Jan. 26 2007,00:39)
(yamahor @ Jan. 26 2007,00:34)
(Black Bird Killer @ Jan. 26 2007,00:30)
all_coholic.gif
WHats that for?
Guy is a little high on his price
Oh... I thought it might be a board member who would then kick my arse...


I day dream too much...
<span style='font-size:15pt;line-height:100%'>It's my auction.  And now I'm coming after you</span>




laugh.gif
 
laugh.gif
SWEET!!!! Let me get my knives and guns ready...

laugh.gif
 
(yamahor @ Jan. 26 2007,00:52)
(Black Bird Killer @ Jan. 26 2007,00:47)
(yamahor @ Jan. 26 2007,00:44)
(Black Bird Killer @ Jan. 26 2007,00:39)
(yamahor @ Jan. 26 2007,00:34)
(Black Bird Killer @ Jan. 26 2007,00:30)
all_coholic.gif
WHats that for?
Guy is a little high on his price
Oh... I thought it might be a board member who would then kick my arse...


I day dream too much...
<span style='font-size:15pt;line-height:100%'>It's my auction.  And now I'm coming after you</span>




laugh.gif
 
laugh.gif
SWEET!!!! Let me get my knives and guns ready...
Ah screw it. Your too big and I'm on the verge of gettin handicap tags for the vehicles
laugh.gif


laugh.gif


laugh.gif
 
(Black Bird Killer @ Jan. 26 2007,00:54)
(yamahor @ Jan. 26 2007,00:52)
(Black Bird Killer @ Jan. 26 2007,00:47)
(yamahor @ Jan. 26 2007,00:44)
(Black Bird Killer @ Jan. 26 2007,00:39)
(yamahor @ Jan. 26 2007,00:34)
(Black Bird Killer @ Jan. 26 2007,00:30)
all_coholic.gif
WHats that for?
Guy is a little high on his price
Oh... I thought it might be a board member who would then kick my arse...


I day dream too much...
<span style='font-size:15pt;line-height:100%'>It's my auction.  And now I'm coming after you</span>




laugh.gif
 
laugh.gif
SWEET!!!! Let me get my knives and guns ready...
Ah screw it.  Your too big and I'm on the verge of gettin handicap tags for the vehicles
laugh.gif
Come on, old man...
laugh.gif



Okay, enough thread jacking my own thread...

laugh.gif


laugh.gif


laugh.gif
 
(yamahor @ Jan. 25 2007,21:27) So, I'm surfing ebay andd find <a href="http://cgi.ebay.com/ebaymotors/Hayabusa-chrome-BUSA-GSXR-1300-Plate-Tag-Bracket_W0QQitemZ170072612283QQihZ007QQcategoryZ3

5580QQrdZ1QQcmdZViewItem" target="_blank">THIS!</a> Look familiar anyone? GMbusa and I both run Very Similar setups...

Min was made in GMbusa's garage in about 10 minutes from a leftover Brakelight bracket. Had it to an unannounced speed multiple times, no problems... This guy wants $250 for a (albeit) thicker, chrome version... I'll stick with mine for now, thanks... Unless the someone on here wants to make one for a reasonable price... Group buy anyone?
Is yours 1/2" thick?


I personally think its an overkill in design.

But to pump those parts out on a one off basis....he's looking at $20-40 each piece..times (2) parts =$80+

Plus the welding (he welded the 2 parts tgether plus a stud or a mounting nut) add $20-40+= $40-60+

Plus any hardware (a few cents at best unless he's buying them at home depot and then they might be a few dollars each) won't add a figure but its impled

The chrome plating.......$30-50+ dependign on where and his discounts and quantities.= $50+


So it'd be safe to say he couldhave $190+ dollars in each of those items....


I say if they sell....let him make a buck. That's a pretty big investment.

Real shame people harrass guys like this and then throw $100+ at Tobin seats which cost under $5 and time to make.
 
looks to me like the undertail might bottom out on it if he hits a big bump
rock.gif
 
(fstbusa @ Jan. 26 2007,07:52) looks to me like the undertail might bottom out on it if he hits a big bump
rock.gif
nope... Connected to the footpeg.
 
(suzuki4life @ Jan. 26 2007,03:50)
(yamahor @ Jan. 25 2007,21:27) So, I'm surfing ebay andd find <a href="http://cgi.ebay.com/ebaymotors/Hayabusa-chrome-BUSA-GSXR-1300-Plate-Tag-Bracket_W0QQitemZ170072612283QQihZ007QQcategoryZ3


5580QQrdZ1QQcmdZViewItem" target="_blank">THIS!</a> Look familiar anyone? GMbusa and I both run Very Similar setups...

Min was made in GMbusa's garage in about 10 minutes from a leftover Brakelight bracket. Had it to an unannounced speed multiple times, no problems... This guy wants $250 for a (albeit) thicker, chrome version... I'll stick with mine for now, thanks... Unless the someone on here wants to make one for a reasonable price... Group buy anyone?
Is yours 1/2" thick?


I personally think its an overkill in design.

But to pump those parts out on a one off basis....he's looking at $20-40 each piece..times (2) parts =$80+

Plus the welding (he welded the 2 parts tgether plus a stud or a mounting nut) add $20-40+= $40-60+

Plus any hardware (a few cents at best unless he's buying them at home depot and then they might be a few dollars each) won't add a figure but its impled

The chrome plating.......$30-50+ dependign on where and his discounts and quantities.= $50+


So it'd be safe to say he couldhave $190+ dollars in each of those items....


I say if they sell....let him make a buck. That's a pretty big investment.

Real shame people harrass guys like this and then throw $100+ at Tobin seats which cost under $5 and time to make.
Well, coming from seeing the G3 tag holder that are custom cut and chrome plated going for, what, $70-ish... it seems a bit steep.
 
(yamahor @ Jan. 26 2007,06:22)
(suzuki4life @ Jan. 26 2007,03:50)
(yamahor @ Jan. 25 2007,21:27) So, I'm surfing ebay andd find <a href="http://cgi.ebay.com/ebaymotors/Hayabusa-chrome-BUSA-GSXR-1300-Plate-Tag-Bracket_W0QQitemZ170072612283QQihZ007QQcategoryZ3



5580QQrdZ1QQcmdZViewItem" target="_blank">THIS!</a> Look familiar anyone? GMbusa and I both run Very Similar setups...

Min was made in GMbusa's garage in about 10 minutes from a leftover Brakelight bracket. Had it to an unannounced speed multiple times, no problems... This guy wants $250 for a (albeit) thicker, chrome version... I'll stick with mine for now, thanks... Unless the someone on here wants to make one for a reasonable price... Group buy anyone?
Is yours 1/2" thick?


I personally think its an overkill in design.

But to pump those parts out on a one off basis....he's looking at $20-40 each piece..times (2) parts =$80+

Plus the welding (he welded the 2 parts tgether plus a stud or a mounting nut) add $20-40+= $40-60+

Plus any hardware (a few cents at best unless he's buying them at home depot and then they might be a few dollars each) won't add a figure but its impled

The chrome plating.......$30-50+ dependign on where and his discounts and quantities.= $50+


So it'd be safe to say he couldhave $190+ dollars in each of those items....


I say if they sell....let him make a buck. That's a pretty big investment.

Real shame people harrass guys like this and then throw $100+ at Tobin seats which cost under $5 and time to make.
Well, coming from seeing the G3 tag holder that are custom cut and chrome plated going for, what, $70-ish... it seems a bit steep.
give me a link to the G3
 
That seems like a REALLY high price, especially seeing as i can get one that looks almost identical to it (except with the logo and "hayabusa" laser engraved in it) from the stealership for $112.99
 
I just bought something similar from spyderracing.com and only paid 150 for it, I thought this was steep, granted it only polished and not chromed.

tag relocator
 
(yamahor @ Jan. 25 2007,20:20)
(fstbusa @ Jan. 26 2007,07:52) looks to me like the undertail might bottom out on it if he hits a big bump
rock.gif
nope... Connected to the footpeg.
yeah I see that looking at it a second time... I glanced at it the first time and it looked like it was attached to the swingarm.
 
(BigSimp @ Jan. 27 2007,02:16) I just bought something similar from spyderracing.com and only paid 150 for it, I thought this was steep, granted it only polished and not chromed.

tag relocator
I won't dream of comparing what you bought and this piece.....you bought something that's polished...not chrome....and I highly doubt its anywhere near 1/2" thick.

You bought a piece of bent polished and cut alumiuim sheet (probably cost $4 to make)
 
Back
Top