Hmf high mounts

Takenlives

Registered
Guys, I know you can retain your rear pegs with the high mount install. But, my question are your guys using the stocks bolts from the Pegs. The reason I ask is I brought my exhaust used. And unless I'm doing something wrong.. My stock bolts are TOO SHORT.... What would be the recommendation on new bolts from a hardware store... thanks
 
Yeah, what pipefighter said...
The exhaust system should have come with some longer bolts and spacers~ If they're not there, contact HMF and/or whoever you purchased them from and have them make it right~
 
Thanks guys, I contacted the seller and will see whats good? If that falls thru, then I will contact HMF.... thanks again
 
Back
Top