HELP!! PLEASE CAN SOMEONE HELP

[1 BAD 2K]

I have an EMERGANCY that needs someone's help ASAP or I'm going to miss the BASH!!

I have Performance Machine Roulette wheeles and ordered a 42 tooth sprocket off their web site. Problem is that all of PM NEW wheeles come with a 6 hole patteren and cush drives.

I have the old style 5 bolt patteren direct bolt on!(NO CUSH DRIVE) The other problem is I talked to PM yesterday and they are back ordered 3-4 weeks for 39-44 tooth 5 bolt sprockets! My old sprocket is TOTALLY SHOT!
My only option is to have one made still 1-2 weeks turn around or Hope that someone here has one (40 - 44) they will let me have so I can make it to the BASH.

If anyone has one for me please OVERNIGHT it to Greg at HPC and let me know. Thanks Guys!

Here's my info:
530 ZZZ chain
16 Tooth front
5 bolt pattern
Direct bolt on
No cush drive
PM Roulette wheele
2000 busa

[GoldenChild]

I got some pm 5 bolt sprockets but bet they are for 520/525 chain..I'll check in a bit.

[1 BAD 2K]

Thanks GoldenChild But that's going to put me into a bifferent situation. I'll need a front and rear sprocket and new chain 520/525. I don't have the $$$$ for that right now

. Thanks for looking out

[bacharles]

Hey Greg,

I'm not sure of the bolt pattern right now or even if it will work. But I have a 42t Vortex sprocket made for a set of RC Component wheels. I'm not near the bike right now and can't remember if it is a five or six bolt pattern. If you let me know, then I can get the sprocket off to you tonight.


Brian

[bacharles]

And can you tell me where you got the rear axle plug?

Been searching for someone who sells them single and not as a set.

[bacharles]

And the $137 Spinwurkz one is just simply out of the question... Can't see giving up that coin for something so simply made and can get easily for 50 or 60 bucks...

[1 BAD 2K]

I think I got the front , rear, frame and exhaust plug as a set through Roaring Toys or Spider Racing.

[dadofthree]

good luck bump

[1 BAD 2K]

OK I have good news and bad news!

1st the good news I found a sprocket from Vortex a CAT 5 that will fit.

2nd  the bad news is I wont get my bike until Saturday night so no bash for me

3rd the good news is I'LL BE GETTING MY BIKE BACK TO RIDE AFTER 4 WEEK IN PIECES!!

[dadofthree]

Sorry you can't make it dude. Hope to see ya next year.

[1 BAD 2K]

I want to say THANK YOU to everyone who tried to help me. I also want to say THANK YOU to GREG @ HPC who has helped me TREMENDIOUSLY!!