Heli bars and lowering tripple

cjaj_70

Registered
Does anyone know if there is a lowering triple tree that can be used with the heli-bars or is there a clearance issue?
 
i`ve got a set of reaper risers that would lower the front by 3/4"
 
I have the 1.5" Reapers and have the front lowered 1.25" with a ZGDB screen and had to dremel (drum sander) some "notches" so my switch housings don't hit. I tried rotating the housings and they still hit. The only real issue was the high beam turning on with the bars cranked to the right.

Hope this helps...

Need a pic of the notches?
 
I did a 3/4 inch drop with my stock bar tree along with a set of Heli's had to cut the Double bubble so I pitched it and put on a ZG Touring screen and everything clears.
 
I was actually wondering the same thing. I had 1" risers on the stock tree with Heli's on my 2005, But I want to lower my '06 more than that.
I want to do a lowered tripple tree with the Heli's.
 
Thanks for the info guys, were doing grandpa's 06 firtst, already have the heli-bars on it, he's running a sport tour puig so hopefully everything fits.
 
Back
Top