Heli + 3/4" GenMar w/ Puig Z Racing Screen

[Busaman1963]

Currently have Heli's and Puig Z-Racing Screen and want to add the 3/4" GenMar Risers on my K8. From all that I have read through Searching this Forum I am just trying to confirm 3 items :

1) I should only have to re-route the Choke Cable through the space between the 2 bolts for the Gas Tank and not lengthen any other cables ?

2) Do I have to disconnect the Choke Cable or can I just move it over ?

3) Will my Puig Z-Racing Screen work with a little dremeling along the sides or do I totally ruin the integrity of the screen ?

Really appreciate everyone's help, have done all my mods myself through tips and advice from you guys !!!!!

 

[DR1300R]

No mods needed at all.. Samm has done this same mod to his '08..

I should say you do need to adjust your clutch and brake lever down a tad bit, but I beleave that is all.. send Samm a pm to make sure.

 

[skydivr]

Search for my posts, you will see a thread on 3/4 Genmar + Helibar + Suzuki OEM Touring Screen. It fits. No cable mods it works just fine on my Blue K8

here is the link

https://www.hayabusa.org/forum/new-...efinitive-answer-k8-genmar-riser-helibar.html

 

[Busaman1963]

Thanks DR will do that .

No mods needed at all.. Samm has done this same mod to his '08..

I should say you do need to adjust your clutch and brake lever down a tad bit, but I beleave that is all.. send Samm a pm to make sure.

 

[Busaman1963]

Thanks Sky, I read your post but wasnt sure about the PUIG screen, will go back to double check. Thanks

Search for my posts, you will see a thread on 3/4 Genmar + Helibar + Suzuki OEM Touring Screen. It fits. No cable mods it works just fine on my Blue K8

here is the link

https://www.hayabusa.org/forum/new-...efinitive-answer-k8-genmar-riser-helibar.html

 

[freponyryd]

I didnt think the 08 has a choke cable. Or maybe I got a good one.

 

[semperfi]

There is no "choke" on the Gen 1 either. It is actually an "idle advance" on a fuel injected bike.

 

[Busaman1963]

hmmmm, there are 2 cables coming from the throttle, are those the cable (s) that need to be re-routed ?