HEL brake line install question

[ltsrunm]

I'm trying to install a set of HEL braided lines, but I'm not sure which line is for the front caliper to caliper. The clutch and line from reservoir to caliper are fine. The other two lines are identical and are about 12" longer than the original line from caliper to caliper. Also, neither of the lines has two rubber protectors for holding it to the fender. Anyone have any experience they can share? Thanks.

 

[Blanca BusaLess]

A little confused ?
You have the clutch line done .
You have the long line from front brake res to caliper done .

and now you have two lines left correct ?
one for over the fender and one for the rear brake ?
Neither with grommets ?

The angles of the banjos should be diff enough to where you can tell which one is which when laid on right ?

Can't comment on the grommets as the kit I got was new came with all required . Did you get this new ?

 

[jdsbusa]

Don't know about HEL but Galfer uses independent lines for each caliper rather than a crossover like the oem lines. Can you post a pic of your lines up?

 

[rockadaous]

You have independent lines. No crossover like jds pointed out.

 

[ltsrunm]

Thanks for the help. The lines are independent for each caliper. Now to get it all bled.