bigdukie72
Registered
Bought Harris rearset on EBAy and the directions are very vague. Have problems with the rearbrake side. Can anyone help? I have a 2007 hayabusa
Harris rearset FOO-SU 300-02-B Install
- Thread starter bigdukie72
- Start date
turbobusa2000
Registered
I didn't know Harris Perf. made a rearset. Got any pics? What are you having problems with?
teamorion22
Registered
i got vortex and i had 2 remove the rear brake light because i didn't get an xtra piece. i never use my rear brake solo so it i didn't care
I vaguely recall readin about some of the AFM reasets needing a 'brake light' modulator or another piece to make the rear master cylinder and brake switch op correctly .
Is this the prob you are having ?
Is this the prob you are having ?
jdsbusa
Registered
What problems with the rear brake are you having? Related to the springback perhaps?
Most all require a brake light switch. They make a banjo bolt with a switch.
Posted via Mobile Device
Posted via Mobile Device
bigdukie72
Registered
With help from JDSbusa the mod for the rearset from harris came out fine. Had to get my own springs from local hardware store and a couple of washers to set springs on and a door spring to hook up the OEM brake light switch with the brake lever. Works great to for drive with no problems
+1 way back when rear sets were designed more for the track then street. These days rearsets are more street functional. The banjo bolt switch was always an easy solution. 
Similar threads
