This is some pics of my harris busa and kanji logo grips installed on my bike. It was super easy since I have done this many times before. The only thing that I had to do extra was on the clutch side handle bar, I cleaned the bar really good and added some black rtv silicone lightly and then slid the grip on to keep it from twisting on me. On the throttle side, at the very end of the plastic bar there is a raised lip that will eventually saw your grips off at the end unless you remove it. I used my cordless drill and a rasp on the end.
I also wanted to show the factory bar end weights that I polished and reinstalled. This is a lot harder than aluminum to polish. Thought you guys might be interested in an alternative to buying some new ones.
I also wanted to show the factory bar end weights that I polished and reinstalled. This is a lot harder than aluminum to polish. Thought you guys might be interested in an alternative to buying some new ones.
