rashad
Registered
Hey guys, I searched and searched and cannot find this exact problem or a fix for it... I bought chrome hand control covers (like turn signal/starter/headlight button) on ebay. They were listed for my year (02') but apparently are made for the slightly newer years that have the flass to pass and four ways. I did the left side fine, but on the right side the starter button was way different because of the hazard rocker switch... so I actually had a newer switch laying around and I swapped the newer switch and wires for the right side controls.
The problem is, the headlight, taillight and the aftermarket gauges will not turn on with that newer switch. It baffles me because if anything it has MORE than the old switch, not less... but apparently they are wired completely different. Has anyone tried swapping to the newer switches with flass to pass etc.. and how did you do it? I just want these chrome covers to work.. and this was a ton of work for very little bling to be honest.
The problem is, the headlight, taillight and the aftermarket gauges will not turn on with that newer switch. It baffles me because if anything it has MORE than the old switch, not less... but apparently they are wired completely different. Has anyone tried swapping to the newer switches with flass to pass etc.. and how did you do it? I just want these chrome covers to work.. and this was a ton of work for very little bling to be honest.