This is VERY interesting. They look "narrower" than the stock bars though, definitely narrower than the helibar option. I'm interested in more info as well..
The bars I used were off a 1992 gsxr750WN they are the same width as the stock bars and there are no clearance issues. My bike is lowered 20mm, the bars just bolt straight on, you need a minimum of 30mm of fork leg showing though the top tree for the bars to fit fully on, as for bar ends the tubes are just hollow so I used aftermarket ones I filled the holes in the tree with countersunk washers and bolts. The bars had a small bracket on the side which I cut off before I polished them.
The bars I used were off a 1992 gsxr750WN they are the same width as the stock bars and there are no clearance issues. My bike is lowered 20mm, the bars just bolt straight on, you need a minimum of 30mm of fork leg showing though the top tree for the bars to fit fully on, as for bar ends the tubes are just hollow so I used aftermarket ones I filled the holes in the tree with countersunk washers and bolts. The bars had a small bracket on the side which I cut off before I polished them.
No the bars are 25mm higher then stock, dropping the bike 20mm does not change the height of the bars in relation to the seat height as the stock bars are fitted to the tree not the fork legs
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.