GSP-mount




R1000

Registered
A quick and dirty mount for GPS on Busa -08. I use the car-window Easy-port holder and locate it on the Busa's RPM-gauge. It is then easy to move it between cars and bikes.

DSC00058.jpg
 

NeOhiofan

Registered
I don't have pics right now but I removed the gauges & Windscreen. I then too the suction cup part out of the mount. I then drilled a hole in the plastic above the gauges. I then put a bolt through the mount where the suction cup used to be & put it through the hole I drilled. Works great & the GPS is so far up under the cowlin it has not gotten wet yet & I have rode in a monsoon or 2.
 

Akumu

Registered
I don't have pics right now but I removed the gauges & Windscreen. I then too the suction cup part out of the mount. I then drilled a hole in the plastic above the gauges. I then put a bolt through the mount where the suction cup used to be & put it through the hole I drilled. Works great & the GPS is so far up under the cowlin it has not gotten wet yet & I have rode in a monsoon or 2.
Pics of that would be interesting.
 

UncleSteve

Gear good - roadrash bad
Donating Member
Registered
Offset to the left so gauges are visible and power plug with 90 degree plug. Powerlet plugs are very good for accessory hook ups.

IMG_0493.jpg


IMG_0496.jpg
 



Latest Bikes

Forum statistics

Threads
172,730
Messages
3,089,449
Members
47,627
Latest member
manxbusaracing
Top