Grab rail

[PORT]

I noticed a few Busa's have the back hump on with the back grab rail. I looked and can't see how you can install the grab rail and still snap down the hump, is there different models, a trick, or are people modifying with a slot?

 

[warbrown]

You'll need to use a dremel tool and cut some notches in the hump. Do a search on "hump mod"

 

[paulos]

im just doing that 1 myself,i bourght a dremmel off ebay and im going to cut the kanji logo into the hump and put a neon light into it.
im starting it this weekend so 'ill keep ya posted on how it goes.i was told to cut the logo on its own will take best part of 10 hrs to do?(if ya wanna get it right).
then when i have cut it out im gonna put some mesh into it.

 

[DNGrumpy]

Here's mine, I marked it with a SHARPIE and then used a dremel with a smal drum head...



What happened to the "Add a link" thing...?

 

[BigBSBusa]

Check this link: Hump Mod. He's a member here.

 

[inthexring]

I might have to try this

 

[Jet Li]

Check this link:  Hump Mod.  He's a member here.

That's the Linky I used. Best advice is to take it slow. Took me about 2 hours and turned out fine.

 

[PORT]

I will attempt it next week.
As always, Thanks for the help

             Happy Holidays