grab bar help

[busa_boy_69]

Ok this may be dumb but i need advice. I just got my new bike and am trying to remove the grab bar. But 2 of the 4 bolts will not BUDGE! Did anyone else have this issue?

 

[busa_boy_69]

Nevermind. I used a hammer on the allen wrench and they finally broke free.

 

[FlatlandBusa]

If you have any allen bolts that are impossible to remove in the future, take a allen socket and put it on the bolt then give it a few wacks with a hammer like you are driving a nail. Usually afterward, the bolt will come right out without stripping.

 

[ky busa]

 

[busa_boy_69]

Its funny that you said that cuz thats basically what I ended up doing. I put the allen wrench on it and hit the wrench with a hammer and they finally broke lose.