Genmar riser installed. Need to fill fork Adjuster holes

[pworlledge]

What's out there to make it look more pleasing than the 2 big holes? Also anyone got a cheaper solution for bolt covers than a dealership?

 

[1bondoman]

loosen the fork tubes and let them slide up.

 

[skydivr]

loosen the fork tubes and let them slide up.

Nooo... you are changing the geometry of your suspension...which effects how your bike handles.

Actually, you need the holes in order to make suspension adjustments. I have the same risers, and I'm used to the look. Not a big deal.

 

[Postal]

Nooo... you are changing the geometry of your suspension...which effects how your bike handles.

Actually, you need the holes in order to make suspension adjustments. I have the same risers, and I'm used to the look. Not a big deal.

It lowers the front end (if you let the tubes slide up). I've never had a problem with handling, done it to all my Busas, and still railed them through the twisties of WV with ease.

P.

 

[frisbee]

I'm sure you can find some caps that will cover them.

 

[hillbilly]

I found some black plastic caps at Lowes. Couple of bucks and you are good to go.

 

[lankeeyankee]

loosen the fork tubes and let them slide up.

FAIL!!!
DONT do this. I did it on my 09 and it handled terrible!!
Plus its a pain in the azz to bring them back to oem unless you have a understem stem stand.

 

[Fireman6615]

I found some black plastic caps at Lowes. Couple of bucks and you are good to go.

This was going to be my suggestion, they have a pretty good selection of caps and plugs. If you don't like them in black you can always paint them to match.

 

[rubbersidedown]

..........Buy Now: Hayabusa Dress UP Kit, Frame Plugs | Pashnit Moto

RSD.

 

[1bondoman]

thats why you lower the rear the same amount. lmao!! duh

FAIL!!!
DONT do this. I did it on my 09 and it handled terrible!!
Plus its a pain in the azz to bring them back to oem unless you have a understem stem stand.

 

[1bondoman]

I know thats right!

It lowers the front end (if you let the tubes slide up). I've never had a problem with handling, done it to all my Busas, and still railed them through the twisties of WV with ease.

P.