Generation 2 off of wrecked B-king. Trying to fire up outside of bike.

[adrianm1322]

I have a gen 2 out of a wrecked B-king trying to make sure engine is still running. Need help bypassing all sensors and getting engine to start outside of bike. I lost the digital gauge in the wreck. Let me know all the parts I will need.

 

[nosbig]

If you are using the factory wiring harness then the only two I can think of off hand are the kickstand switch and the clutch switch. Both can simply be bypassed with a jumper wire. It should start just fine without the gauge cluster hooked up.

 

[adrianm1322]

Does this mean I don't have to hook up everything else that is not motor related. Like lights

 

[nosbig]

Does this mean I don't have to hook up everything else that is not motor related. Like lights

That is correct the lights and gauges do not need to be hooked up.

 

[adrianm1322]

what about radiator? do hayabusas run well hot or even at all. Also what is best way to go as far as fuel delivery. should i leave tank together or pull the pump

 

[mjl3truck]

You can't just hot wire the ignition wires. You need to use either the key switch, a ignition bypass from Woods or build your own bypass harness.