Gen2 vs Gen1 gauge cluster connectors.

hendrixgr

Registered
Hi.
I want to ask if the instrument cluster of gen1 and gen2 share the same connector, not connections but the physical connector.
I know that the connections are different but in the future i plan to use the gen2 ecu in my gen1 turbo bike but keep the gen1 harness.
I already have the gen2 ecu connectors and pins, a vr cam sensor to hall effect converter (i will use the same gen1 cam sensor),
and searching for a cam offset pin and the ecu itself.
Of course in the end i can't find a solution i will get me a gen2 harness.
Chris
 
I just found that the connectors don't look the same so the question now is where to buy a gen2 instrument cluster female connector...
Chris
 
If you can't find a gen2 Busa ecu, the B-King ecu is 100% physically the same, only the flash is different.
The B-King and Busa ecu's will work as is in the other bike, but the gauges won't work until they've been flashed.
The changes must be made in Ecu Editor or Woolrich. Either ecu can be flashed to become the other.
 
Hi.
i can find one but it is nice to have alternatives like the B king ecu, thank you or the tip.
Maybe the B king ecu is cheaper also...
Chris
 
Back
Top