Gen 2 Trunk Mod

[cbat2210]

Very Cool Mod!

 

[xchief1320]

Here are the pics of my install. Two show the box I used, The bottom is concave so I figured that would help clearance slightly.
The nitrous bottle shown is a 20 oz, but I made it deep enough to put a 2.5lb bottle.
My bike is lowerd 1" and I still have 3" of clearance with me on it. I highly doubt it will ever hit. Plus i'm raising it back up so that will give me another inch of clearance..

 

[Blanca BusaLess]

OK HERES THE 1ST VOTE FOR A 'STICKY' AS THIS ONE IS GONNA RUN AND STAY AROUND FOR AWHILE.

I'm thinking MP5 with 500rnds of ammo. Gallon jug of water. Blow up doll.
500oz can of pepper spray. 5 Arbys regulars and a whole lotta of Horsey sauce....

 

[killerrudy]

Put some insulation in there and you got room for a 10 peice and some biscuits!

 

[Schism]

OK HERES THE 1ST VOTE FOR A 'STICKY' AS THIS ONE IS GONNA RUN AND STAY AROUND FOR AWHILE.

I'm thinking MP5 with 500rnds of ammo. Gallon jug of water. Blow up doll.
500oz can of pepper spray. 5 Arbys regulars and a whole lotta of Horsey sauce....

the ultimate survival kit, you got my vote.

 

[sixpack577]

Here are the pics of my install. Two show the box I used, The bottom is concave so I figured that would help clearance slightly.
The nitrous bottle shown is a 20 oz, but I made it deep enough to put a 2.5lb bottle.
My bike is lowerd 1" and I still have 3" of clearance with me on it. I highly doubt it will ever hit. Plus i'm raising it back up so that will give me another inch of clearance..

Looks good

 

[Greenbean]

OK HERES THE 1ST VOTE FOR A 'STICKY' AS THIS ONE IS GONNA RUN AND STAY AROUND FOR AWHILE.

I'm thinking MP5 with 500rnds of ammo. Gallon jug of water. Blow up doll.
500oz can of pepper spray. 5 Arbys regulars and a whole lotta of Horsey sauce....

Same here!!!

 

[Greenbean]

The bottom is concave so I figured that would help clearance slightly.

Where did that box come from?

 

[xchief1320]

Looks good

Only because of you being the first one to do it and sharing..

 

[xchief1320]

Where did that box come from?

Walmart in the office supply section..

 

[Greenbean]

Walmart in the office supply section..

Thanks

 

[xchief1320]

One word of advice the box I listed is kind of thin. IF the tire ever came in contact with it I think it would rub through it real fast. It probably will never be an issue but it's worth mentioning..
I'm probably going to make mine out of Aluminum now that i'm happy with the way the plastic one came out and i'll use it as a template.

 

[Greenbean]

Cool thanks for the info. I got the other one from Walmart but like the idea of the concave design. I am gonna try and remove all the stuff today and get an idea of how much room I want/need under there.
Posted via Mobile Device

 

[stangman35]

This will be the first mod I make to my new to me 08 when I pick it up tuesday.If this hasnt been made a sticky by now it should be.

 

[kennym4]

I would NEVER think of doing something like this......GREAT idea !!! I ALWAYS need more room for crap.

 

[stangman35]

this was the first mod i did,day after I got the new bike.
mmmmm...sobe

Is this a sticky yet

 

[Sous]

Did you use rivets to secure the tub to the rear plastic of the bike? Also, some have done this without removing the under body, did you leave it on the bike or remove it to cut the hole for the tub?

 

[stangman35]

yes with rivets

its not very hard to remove the rear plastic,and pull the underbody out.Much easier to work on with it out of the bike.
I used a trash can to do mine,also from walmart.It seemed like it had thicker plastic.I also didnt cut away the rear of the tub so I dont have to worry about stuff falling out the rear.
The bottom of the can is the same size as the file boxes that were used.

 

[JJsBusaRox]

I wish I could do this mod. But knowing me, I would just mess it up !! Maybe if there was step by step intructions or a video only would I attempt to do this. I'm just not crafty like that !!

 

[BigD814]

Sticky... sticky... sticky!!!