gen 2 busa lowering front end

[atl ryder]

hey I got the triple trees on will I need to take off the fairing to get to the lower bolts or cam I do the four bolts with the fairing on?

 

[Telboy2000]

Never had to remove the bodywork...a good socket set or torque wrench and patience.

 

[todd moyer]

A small socket & ratchet and open/box end wrench will work perfectly. Just unclip a couple plastic pcs so you can reach it from the under side. It's all I had to do when installing and de-installing a kit on my Gen II.

 

[mjl3truck]

It can be done but I prefer to take the fairing off. Less scratches and I can get a good angle on my torque wrench to make sure the torque is correct.

 

[atl ryder]

thanks guys I got it done I ended up a lil over 3/4 of a inch
busa.jpg