gen 1 exhaust. gen 2 bike

[mike04busa]

I was wondering the difference in the gen 1 and 2 exhaust. What needs to be modified for a gen 1 exhaust to fit a gen 2?
Thanks

 

[VIPER]

it is not a good fit at all...seems i remember someone doing this years ago...they had to swap the pipes left to right. man i wish i could remember...

 

[el stumpo]

I thought it was just that the Gen2 needed a bung hole for the O2 sensor?

 

[mike04busa]

If its just welding a O2 bung, that's easy.

 

[Kennith Fultz]

I think it's going to depend on the type of exhaust you are going with. There are really only a few minor differences. The biggest being the overall length of the exhaust (Gen II is a bit longer). If you are talking about using a stock Gen I exhaust on a Gen II (or vice versa), I would question the wisdom behind that. More hassle than it's worth. But whatever you decide to do, just make sure your head-pipe and mid-pipes clear your oil pan (both cold and hot). Good luck.

 

[GIXERHP]

As long as the can does not have a fixed mount position, It will work.
You do need to add a bung, or have the pair valve turned off in ECU reflash

 

[mike04busa]

Thanks guys. But i found a gen 2 akrapovic full system for it.

 

[davapors]

here you go I have a genI pipe on my genII