Does anyone have a map for 1397 making 205 to 215ish with stock fuel pump
Just looking for something to keep me running so I can put a 100 miles on it before I go to the dyno any help would be much appreciated
Yeah I don't send out maps I build, Sorry.. I never put miles on a fresh motor without heat cycles and some dyno breakin, before the real dyno session, cause you don't know what your motor really wants till you dyno it.. I build them, put bike on dyno, break in with heat cycles, install my base map and start tuning... You don't need to put miles on a bike with someone else's tune, you stand more of a chance being lean and having serious issues as no two motors, fuel systems are the same.. This is why I don't send maps out, I would be to blame if you had an issue..I rather you call me a azz for not sending them out, than have my name destroyed with a few clicks on the net for you blowing up your bike because of differences in tune/setup...
Nah I wouldn't blame u but I understand where your conning from but for Mr I've always done it this way ride it for about 100 miles get it tuned I just lost all my maps when my pc crashed and the 184 hp map I have now can't keep bike running below 2000rpm. With that being said I have no hard feelings thanks anyways!
Sorry - my map is an ECU map - baselined on the dyno, perfected at the 1/4!
I had to take my fresh 1397 to the dyno with nothing but the stock map (and a dead PC5!) nothing wrong with a dyno break-in as long as they know that and start out easy to build the map from idle.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.