Gauges light but not working

[Suzuki17841]

03 hayabusa everything worked when parked overnight, went to ride next day no speedo, tach, fuel gauge, temp, clock, or milage.... everything still lights up but no movement.
Tail lights, turn signals, head light, neutral light all still work

 

[Kiwi Rider]

Check the cluster (dash) connector plug for a good connection, just disconnect and reconnect a few times, first thing I'd try . . . connections are the first port of call when electrical gremlins show up.
Does the starter crank it and does it run ok?

 

[fast_pace77]

The gauge cluster uses two grounds. Make sure both are still in tact in the harness and let us know.
I bet one of them is broken.
Or the R/Bl wire

 

[Kiwi Rider]

The gauge cluster uses two grounds. Make sure both are still in tact in the harness and let us know.
I bet one of them is broken.
Or the R/Bl wire

I wish I could have premonitions like this Fast-pace, but you're probably right on the money there my friend, sounds like words spoken from experience? . . . maybe??

 

[Suzuki17841]

Got it back working thank you everyone for your help, unplug the gauge cluster cleaned it all up a contact cleaner put it back together now working perfect

 

[fast_pace77]

Got it back working thank you everyone for your help, unplug the gauge cluster cleaned it all up a contact cleaner put it back together now working perfect

Nice! Welcome to the org

 

[Kiwi Rider]

Got it back working thank you everyone for your help, unplug the gauge cluster cleaned it all up a contact cleaner put it back together now working perfect

Connections connections connections, numero Uno to check!!