Fuel Injection Light

[dbusa101]

Anyone Got a Clue on This One? Bike runs fine while riding. The light didnt start coming on untill after I changed the plugs. Was having a little trouble starting, So i figured it was time for a plug change. While changing the plugs I broke a vacuum hose sensor, Tried to start it with that broke and it spit and sputter, back fired a time or two. SO I got that back fixed. And every since . the light has come on even just when i turn the key on. I rode it down the road and i noticed it start flashing. Have no clue what it is, Please advise.

 

[Burger King]

If the sensor is broke or not plugged in it will flash until you fix it. Pretty straight forward.

 

[dbusa101]

I only broke the nipple off where the hose attaches, but i fixed that. Or so I think.

 

[micbusathens]

disconnect the battery for 15min at least and recheck

 

[Commuta_Busa]

like a computer... cycles the power

 

[dbusa101]

I will try that this evening, Thanx

 

[dbusa101]

Well i went yesterday and swapped the "turbo Sensor" with one from a friends bike and sure enough, Light went out , fixed problem, well here goes another 250 plus dollars