Fuel Gauge

SnapAttack

Donating Member
Registered
Just installed blue gauge couple weeks ago but haven't been able to ride until this morning. Cluster goes through the sweep as normal. Fuel gauge sweeps, returns to emplty then settles back at full with actual fuel lvel at half a tank.

FYI bike has 3k mils and no problems before gauges installed. Did a search on this site and:

Performed gauge reset from manual.
Disconnected/reconnected wiring harness from sender.
Disconnected/reconnected gauge unit.
Checked wires at sending unit.
Used inspection mirror inside of tank, float not stuck.

Sent email to Scott at Blue Gauges but he is on vacation until end of July. Not sure if the mod could have something to do with it.

Any thoughts before I remove tank/sending unit to diagnose?
 
Update from Scott at Blue Gauges. He is willing to take a look at cluster if I ship back. Great customer service to date BTW. Sent post out to area riders that might be willing to plug their cluster into my harness.
 
Scott at Blueguages is good people.

The only time mine did that was after installing my HID's. I have changed the HID's since then and all is good.
 
Just a quick update. Cause was a short in the harness. Gauges are in the clear and look great.
 
Back
Top