Front wheel removal





#1
Hi guys got my new tires and am looking at the front fender. I have front and rear stands but know the front of the bike is not near high enough for the wheel to come out under the fender. So do I just take the 3 allen bolts out of the fender and tilt it back. I have a bike jack and a couple of floor jacks, which is the easiest from some guys with experience?
 

Dino

VERITAS - AEQUITAS
Donating Member
Registered
#2
Hi guys got my new tires and am looking at the front fender. I have front and rear stands but know the front of the bike is not near high enough for the wheel to come out under the fender. So do I just take the 3 allen bolts out of the fender and tilt it back. I have a bike jack and a couple of floor jacks, which is the easiest from some guys with experience?
Just remove the fender, it is easy, and the wheel will roll right out.
 

ks-waterbug

Group Buy Guy
Donating Member
Registered
#4
As said above.... But, I don't think you can remove the fender totally as the brake line holder is riveted to the fender! So, just store it back out of the way while you change the tire out. Be careful not to scratch it during removal/installation...
 

Mr Bogus

Trouble Makers Inc.
Donating Member
Registered
#5
remove caliper bolts
loosen right side pinch bolts
loosen axle shaft
loosen left side pinch bolts
remove fender bolts
slide wheel out

reverse order:

axle shaft is 72ft lbs
pinch bolts 16.6 ft lbs
Caliper bolts 28 ft lbs
 

Similar threads




Most likes - Past 7 days

Forum statistics

Threads
170,997
Messages
3,079,032
Members
46,933
Latest member
Busa Burt
Top