Front Turn Signal Lense Removal

[piratediverjefff]

Wanting to pull off the lenses to tint and thought after removing the one screw from the bottom the entire assembly might "unlatch" like the rears but doesn't appear to be so.Is there another screw up top somewhere and if so do you have to remove the side fairings and/or an upper panel to get at it?

Thanks,
Jeff

 

[piratediverjefff]

Wanting to pull off the lenses to tint and thought after removing the one screw from the bottom the entire assembly might "unlatch" like the rears but doesn't appear to be so.Is there another screw up top somewhere and if so do you have to remove the side fairings and/or an upper panel to get at it?

Thanks,
Jeff

Just did a search(which i should've done first)and from what i could see there does appear to be another screw(Gen II)and requires pulling some panels to get at.

...crap.

 

[BigBSBusa]

There's aso some adhesive holding them together, so be ready to separate the glue either by pulling or heating.

 

[piratediverjefff]

There's aso some adhesive holding them together, so be ready to separate the glue either by pulling or heating.

Thanks bro.

 

[Blanca BusaLess]

Good luck.

Luv ur sig

 

[piratediverjefff]

Good luck.

Luv ur sig

...remembered that from an old episode,Homer got off a good one every now and then.

Don't believe i'll get around to tackling those lenses today...unless you video a tutorial bro.(i used your's for the side fairings and made the job super easy)

 

[busa186]

I put my lenses in the oven @ 150* for about 7 minutes to separate the glue

 

[piratediverjefff]

I put my lenses in the oven @ 150* for about 7 minutes to separate the glue