Finally got some video of my stage 2 kit

[smithabusa]

Went out to show that my boost controller actually works LOL. You can see the boost gauge kinda, 1st gear is close to 0.5 bar (7 psi) and 4th gear is more like 1.0 bar (14 psi). Sucks as you can't see the speedo, but she was a moving I tell ya, just pump gas, I have a 5 gallon drum of C16, just need some time to make a real video.

http://media.putfile.com/Stage-2-Super-Street-Hayabusa

Below are some old videos from last year with my old hahn kit
http://media.putfile.com/Tire-Spin-1
http://media.putfile.com/Hahn-Busa-Low-Boost-Air-Shifting
http://media.putfile.com/20-psi-on-the-street

 

[Pipefighter248]

 

[Sloto200]

very

N-DeeD! Looks like your gear indicator is workin great too!

 

[Guclu]

 

[yamahor]

AWESOMENESS!!! Whats the switches for though?

 

[smithabusa]

AWESOMENESS!!! Whats the switches for though?

The two on the left that I switched down in part of the video turn the boost controller off (GPS mode anyway). So with them up I have 1 solenoid for every gear.

With them down none of the solenoid come on.

The two on the right manually turn on solenoids 2 and 4 (2nd gear is a bleed valve, 4th gear isa regulator). At the moment the way I have it set, switch second to the right would give about 10 psi, the rightmost switch would give 14 psi, and the two together would givemore than 14 psi, haven't checked it as I am running pump gas and not wanting to go voer 16 psi without some good gas in there.

I might hook those switched to a flash to pass button off an 05 bikeif I want push button instaboost versus flipping a switch. I personally like it as a 6 stage gear based controller best.

So it can work as a 6 stage gear based or a 4 stage manual controller

 

[STUNNAH]

Nice vids...

 

[mistaforty]

speed >

nice lookin forward to the full on vids with the c16

 

[TALYN]

 

[greyrocket]

dam looks like it go's. hmmm turbo