Fi light is on after i installed a powwer commander any help out there?

NEMESIS127

Registered
I have a 05 le and put exhaust tre and a powercommander on now my fi light is on most of the time does anybody have any fixes fore this? :beerchug:
 
do the jumper on the test wire to ground, it will give you a code one the dash.

gen2 is the red/white, black white, the two stacked wires on the outside. on the plug under the seat with a cap on it. you can search "how to to pull FI codes" and you will get some results.

once you have the code see which one it is, then go from there. probably a lose or missed connection
 
i had the bike at the dealer to get the code but they said it didnt give one but the light comes and goes and did check the tre its all good
 
May the PCIII connector isnt fully seated? Make sure no wires are getting pinched along the way too.
 
you have to pull the code while the FI light is on. without the code your shooting in the dark, you can pull the code yourself, write it down. then check it out.
 
Back
Top