Failed inspection in Germany for noise

[ZBusa350]

Hello,

I just recently moved to Germany and in order for me to register my Busa, I need to get it inspected. Everything on my motorcycle passes EXCEPT my exhaust noise, which I knew most likely would fail since I'm running a Brock's Alien Head. I am about 5-6 decibels over the allowable noise.

Is there another muffler that Brock's offers to replace my Alien Head with, without having to swap out the whole exhaust? Or, is there anyway to silence it a little more just temporarily to get me through? Going back to stock exhaust is not an option.

Thanks, Aaron

 

[BadNasty08]

Don't they sell a noise reduction insert?

 

[ZBusa350]

Don't they sell a noise reduction insert?

Can you link it? I actually did buy an insert, but when it showed up it was too big, as in it wouldn't fit inside the pipe.

 

[piratediverjefff]

Can you link it? I actually did buy an insert, but when it showed up it was too big, as in it wouldn't fit inside the pipe.

Did they send you the right insert(I see they have a 2" and a 2.25")?Hell,if nothing else,pull out the baffle and have a local welder temporarily plug it up a bit,maybe add some more packing,etc.http://www.brocksperformance.com/Instructions/Hayabusa/BPP-NRPupdated.pdf

 

[dadofthree]

Contact Brocks I think they have something that will help

 

[ZBusa350]

Did they send you the right insert(I see they have a 2" and a 2.25")?Hell,if nothing else,pull out the baffle and have a local welder temporarily plug it up a bit,maybe add some more packing,etc.http://www.brocksperformance.com/Instructions/Hayabusa/BPP-NRPupdated.pdf

I think I got the 2.25, guess I needed the 2"

I wasn't aware that I could remove the baffle. I can get lots of packing no problem.

 

[Blanca BusaLess]

Stuff a banana in it.

 

[piratediverjefff]

I think I got the 2.25, guess I needed the 2"

I wasn't aware that I could remove the baffle. I can get lots of packing no problem.

With the Alien Head I think you'll have to drill out the pop rivet,I have the Short Meg which comes with a set screw.The baffle's in there pretty snug(mine was),may have to pull the megaphone off(I did)and tap it out from the bottom.

 

[nosbig]

Pack some steal wool in there. I have done it with cars never a bike though.

 

[piratediverjefff]

There you go,nosbig has a super quick and easy fix(I never thought of that bro,that's why you're the brains of this outfit ).

 

[ZBusa350]

Thanks guys. I will try the cheapest thing first which would be the steel wool idea, then go from there.