Ever stop and think

[c10]

I'm to scared to list them all lmao

 

[Mr Brown]

Forgot about

Aluminum Subframe
PC5
Autotune
HID's

Went back and added HIDs and clear lenses

 

[white.Busa]

I only have the basic changes in my busa

Ohlins TTX 36 Rear shock
Ohlins front fork springs
Ohlins Steering Damper SD030
BREMBO 19 RCS Forged Brake Master CYLINDER
BREMBO R 16RCS CLUTCH RADIAL
BREMBO 108 mm M4 Radial Cast Forged Calipers Kit
TiForce full exhaust system 4-2-2 titanioum/carbon
DNA air filter
ECU reflash and remap
Gilles AXB Black Chain Adjusters Axle Blocks
Led lights
carbon front fender
Genuine OEM factory tank pad
Rizoma Foot pegs
Rizoma grips
Powerbronze Double Bubble wind Screen
Renthal front and rear sprockets
R&G Racing Aero Crash Protectors
Yoshimura Street 8mm Works Edition Race Stand Stoppers
Corbin Front Seat
Yoshimura FENDER ELIMINATOR Kit Rear License Plate
YOSHIMURA Oil Filler Plug
Venhil front brake lines
Galfer rear brake line
Yoshimura Bar Ends
DID ZVM SUPER HEAVY DUTY GOLD X-Ring Chain 530 x 118
Galfer front and rear disks

 

[bussassin417]

Well, lets see.

new fairing kit
"knock off" clear double bubble windscreen
chrome stator cover & new gasket
new stator coils
new starter
chrome clutch cover & new gasket
Carpenter clutch kit (adapter & springs)
race silicone coolant hoses
K&N air filter
new rectifier
SS reusable oil filter
new fuel pump & filter
new spark plugs
16T front & 42T rear sprockets (530 pitch)
3D 530Z premium chain (chrome)
HH sinister brake pads (front & rear)
new wave rotors (front & rear)
SS brake lines (front & rear)
load equalizers for LED lights
LED headlights & turn signal
clear turn signal lenses
clear rear taillight with integrated turn signals
new headlight with RGB Halo's
12 strip LED body kit
chrome frame plug kit
chrome front & rear axle cover kit
chrome rear spools (for stand)
chrome frame sliders
"chrome" looking frame cover
"chrome" looking neck cover
"chrome" looking front caliper covers
mirror with LED turn lights
chrome passenger grab bar
clutch & brake levers
clutch & brake foot controls
clutch & brake reservoir caps
triple tree
fork & yoke covers/caps
chrome fuel cover
adjustable side/kick stand
chrome grips

I'm sure I forgot something. Total cost was less than $2K US dollars. I'm cheap !

And I will admit, I did none of it. (only installed halos in headlight assembly)

Haven't picked up the bike yet either. Been on the road for work.

When I do get her back, I'll post many pictures for sure. (after riding of course)

 

[bussassin417]

Before

After

 

[bussassin417]

Sorry

 

[ROADTOAD1340]

Sorry

Now I see them nasty fastener spikes bro , you wont be popular track day !! Hehehe !! That light setup , does it flash from color to color , could be just the thing to overtake in a hurry , flashing blue red and white !!

 

[Nastee]

When you have multiple lists then just stop keeping a list cause it is so long.

 

[ROADTOAD1340]

L2 current mods parts list ,
engine stock / sealed . various ti and aluminum fasteners covers and cooler mounts etc. .

Sprint P08 F1-85 Filter
Airbox short stacks & heat proof wrapped
1/4 turn throttle
ECU flash
PC5
Cordona quick shift + shift light
Speedo healer
Shorai battery
Brocks clutch mod

Standard bodywork with
Magical Racing carbon panels
Clever wolf carbon tank protector
Magical Racing mirrors
F.Fabbri screen
Agras fender

Standard chassis
DME aluminum subframe
Ohlins SD030 dampner
Ohlins FGRT208 fork in custom black
Ohlins TTX36 shock
Agras top triple
Renthal Gen 3 clipons
Full Titanium Axles , full ti engine mount bolts , full ti suspension mount bolts , ti subframe mounts and aluminum throughout
BST Wheels , 3.5" x 17" front , 6.25" x 17" rear
titanium sprocket studs and ti rotor bolts
K Factory 47t lightweight sprocket
Gilles rearsets refit with full ti

Brembo Black GP4-RX .484 front calipers
Brembo Black GP2 84mm rear caliper
Brembo RCS 17 X 18/20 brake master + reservoir
Brembo RCS 16 X 16/18 clutch master + reservoir
Fren tubo carbon lines
Galfer rear rotor
Active under slung carrier
Braketech 330mm ductile iron full floaters
Full titanium fasteners fitted to all components throughout entire motorcycle .

L2's current spares and new parts
Yoshimura billet camshafts / slotted sprockets
Ohlins silver FGRT208 forks
Ohlins TTX36 shock
Custom swingarm
Agras caliper mount
Clever Wolf carbon panels
Clever Wolf carbon guard
A-Tech carbon guard
Custom Streetfighter triple clamps
BST Wheels 3.5" x 17" front & 6.00" x 17" rear
titanium sprocket studs and nuts & rotor bolts
K-Factory 45t sprocket
Gale speed floating rotor

There is more parts on order for new swingarm swap over .

 

[bussassin417]

... flashing blue red and white ...

The halos do cycle through colors. But all colors. Not just blue, red and white.

My bike came with a headlight modulator that flashed headlight (low or high) continuously during the daylight. It was awesome, cars would move over when I came up behind them. It was legal to have in my state.

The modulator was removed because I thought it would look weird with the halos. I did have the mechanic wire assembly to have both bulbs on continuously; either both low or both high.

Can't wait to see how it looks, in the day & at night.

I had the mechanic wire the assembly that way for new halo projectors; which also are dual beam LED.

Though the halos and demon eyes of these projects are just red, not RBG. Maybe next time !

Bonus: these halo projectors LED bulbs do have a flash function.

 

[ROADTOAD1340]

I only have the basic changes in my busa

Ohlins TTX 36 Rear shock
Ohlins front fork springs
Ohlins Steering Damper SD030
BREMBO 19 RCS Forged Brake Master CYLINDER
BREMBO R 16RCS CLUTCH RADIAL
BREMBO 108 mm M4 Radial Cast Forged Calipers Kit
TiForce full exhaust system 4-2-2 titanioum/carbon
DNA air filter
ECU reflash and remap
Gilles AXB Black Chain Adjusters Axle Blocks
Led lights
carbon front fender
Genuine OEM factory tank pad
Rizoma Foot pegs
Rizoma grips
Powerbronze Double Bubble wind Screen
Renthal front and rear sprockets
R&G Racing Aero Crash Protectors
Yoshimura Street 8mm Works Edition Race Stand Stoppers
Corbin Front Seat
Yoshimura FENDER ELIMINATOR Kit Rear License Plate
YOSHIMURA Oil Filler Plug
Venhil front brake lines
Galfer rear brake line
Yoshimura Bar Ends
DID ZVM SUPER HEAVY DUTY GOLD X-Ring Chain 530 x 118
Galfer front and rear disks

If I ever get a chance , I will buy a limited '08 just like yours bro , and your mods are just the right 'ticket to ride ' for maximum street fun . You may want to add 1 more item for even more added fun , that is a quick shifter .
Cheers bro !!

 

[ROADTOAD1340]

Forgot
Brocks CT Meg full titanium exhaust
Spare full titanium axles and many other ti fastener

 

[greg3852]

Spare. Lol. I hate you. Jk

 

[white.Busa]

If I ever get a chance , I will buy a limited '08 just like yours bro , and your mods are just the right 'ticket to ride ' for maximum street fun . You may want to add 1 more item for even more added fun , that is a quick shifter .
Cheers bro !!

My friend ROADTOAD1340 thank you for your good comments, and and your advice.
I still need some improvements.
I expect a final price for the marchesini wheels Aluminium M10RS KOMPE
MARCHESINI : Forged Aluminum Wheel M10S Kompe Evo [Competition Evo] [MA710.714AGC]
I want new mirrors but the rizoma it's very expensive 320 euros!!! and I'm trying to find some sort of alliance 200 euros max

and then follows a new aluminum clip ons
The Ohlins fork FGRT208 it's a dream. I will probably do upgrading the stock fork..
the next stage is what you have already done with titanium screws!!!

 

[white.Busa]

If I ever get a chance , I will buy a limited '08 just like yours bro , and your mods are just the right 'ticket to ride ' for maximum street fun . You may want to add 1 more item for even more added fun , that is a quick shifter .
Cheers bro !!

this color is really great, and now the hayabusa stopped producing it also has historical value because he is the first of his generation (like the hayabusa 1999)

 

[michael parris heuberger]

this color is really great, and now the hayabusa stopped producing it also has historical value because he is the first of his generation (like the hayabusa 1999)

View attachment 1594550

Hi. I will list what I did not mod lower fork legs, fork tubes

 

[ROADTOAD1340]

Hi. I will list what I did not mod lower fork legs, fork tubes

Hahahaha , yes Mike , your list might cause the site to crash , but I still want to see it !!

 

[michael parris heuberger]

Hahahaha , yes Mike , your list might cause the site to crash , but I still want to see it !!

I
Hi. Thanks Mr Toad! I even mod a lot of the custom part I get. I just received my tablet mount from MPS they did not have one to fit my Lenovo tablet also received the DME front stay whitch I will lighten up after I mount the tablet. The mount came with steel bolts and nuts whitch I will replace with aluminium. I also have a lighten and ballanced Falicon crank. That I am not using.

 

[ROADTOAD1340]

I
Hi. Thanks Mr Toad! I even mod a lot of the custom part I get. I just received my tablet mount from MPS they did not have one to fit my Lenovo tablet also received the DME front stay whitch I will lighten up after I mount the tablet. The mount came with steel bolts and nuts whitch I will replace with aluminium. I also have a lighten and ballanced Falicon crank. That I am not using.

You are the most thorough when it comes to shaving any excess 'fat' Mike , I know of no other on a more serious machine build !!

 

[Boosted Cycle Perf]

Ever stop and think about how many parts you have changed, and or customized?

Off the top of my head,
R1 Wheels
Braided Brake lines
Replacement calipers
Painted fairings
24 Volt system
Head
Cams
84mm Pistons
giPro
Second fan
Separate Fan Switch
Yoshimura Full exhaust
ThrottleMeisters Cruise control
and I'm sure many many more.....

Hell I’ve had Lucy for a few weeks. Brought her in for a fuel system and somehow ended up with a turbo on it. NO idea how that happened...