Ducati question

OB_JohnnyB

Registered
I just got a 996 without a manual.
Does any one know how to adjust the front compresion damping? There is no little screw at the bottom of the fork leg like on a 'Busa. It seems there are three adjusters on top but I don't know what is what.

I looked on Ducati sites and can't even figure out how to ask the question.
 
On my ST2 it's on the bottom of the fork, reach straigh up, not from the side like the Busa. Maybe the 996 is similar.
 
hey johnny it is on the bottom of the forks up thru the hole in the end of fork tube,if you look in end of axle you will see hole,

ray
 
sorry

[This message has been edited by rainman671 (edited 26 March 2000).]
 
Back
Top