Going to install new dog bones on bike,,,whats the best way to install them bad boyz? Search is a no go.
Dog bones install
- Thread starter NoFearSpear
- Start date
TXBusa05LE
Registered
Rear stand, jack under shock, remove links. Wheel can stay on.
+1 I used a 4 way lug nut wrench to break em. Ended up taking the exhaust off to get to the top bolts.
DOG BONES??? Ruff,..Ruff,..Ruff!!! OKAY,........bad joke........sorry.
put the rear on the stand, take off hump , put a strap around sub-frame located under the hump and cum-a-long the weight of the bike up( we used the cum-a-long over the garage main I-beam )....this takes the weight off the suspension so you can adjust the height of the bike up or down for the bones installation. Exhaust= from where the mid-pipes start, on back, will need to be removed also.
SLEEPERBUSA
Registered
What Warputer said.
That's the easy way. If you have a Baxley or similar front wheel chock, it will help!
I use a set of tie down straps to lift the bike, 1 click at a time.
That's the easy way. If you have a Baxley or similar front wheel chock, it will help!
I use a set of tie down straps to lift the bike, 1 click at a time.
Search is working again... look in the do it yourself section...
https://www.hayabusa.org/forums/?act=ST;f=24;t=67543;hl=
Some needs to teach me how to post links and name them, etc...
https://www.hayabusa.org/forums/?act=ST;f=24;t=67543;hl=
Some needs to teach me how to post links and name them, etc...
BadWeather
Registered
Bike on stand car jack under shock takes about 15 minutes might have to remove the right side exhaust to get at bolts which will take another 10 minutes. Piece of cake.
