G Gixer Registered Aug 29, 2015 #1 Hello, what should be the pressure in the cylinder with 2mm spacer and 105/105 cams? Thanks a lot
Boosted Cycle Perf Donating Member Site Sponsor Registered Aug 29, 2015 #2 I wanna say 165. Been awhile since I checked one.
G Gixer Registered Dec 12, 2015 #5 Hi guys, Today I measured compression ii These are the results (in the hot engine): 1 = 174 2 = 162 3 = 160 4 = 152 Noting that the first spark more blackened and I guess that gets more fuel. Is it ok, and Is that too much difference. ? ? Thanks
Hi guys, Today I measured compression ii These are the results (in the hot engine): 1 = 174 2 = 162 3 = 160 4 = 152 Noting that the first spark more blackened and I guess that gets more fuel. Is it ok, and Is that too much difference. ? ? Thanks
G Gixer Registered Dec 14, 2015 #7 I hope that the only valves .... I drove about 40,000 miles with turbo and possible dust that enters through the filter, in order to problems
I hope that the only valves .... I drove about 40,000 miles with turbo and possible dust that enters through the filter, in order to problems