Cutting out the fairing

[Mike.P175]

Hey guys can someone give me a walk thru on cutting
out the fairing to show the clutch cover

Thanks for the help Guys

 

[dewie]

search and you shall find..
https://www.hayabusa.org/forums....that+is

probable just need some balls to cut your fairing and a steady hand.

good luck!!

 

[edubb1971]

just take your time and you can do it no problem

 

[kleckbusa]

i started with one beer and started cutting the faring. A few minutes later i cut more than finally got rid of the whole thing

 

[kleckbusa]

from the back

 

[Big Red]

It's naked!

Looks better than the B-King to me.

 

[Mr Bogus]

I covered the area with blue masking tape, too the 3 bolt cover that came off and used it for a template to draw the circle.. Rotozip did the rest (big key was going SLOW) took about 30 minutes

 

[Revolution]

slow annnnd a good hand, if the cutting wheel slips...

secure the fairing and use BOTH hands on the dremel.

 

[NINJA KILLER]

 

[frisbee]

Put some clothes on !!!!


I cut mine the other day and yes its scary but it worked out fine using a dremmel . I used a plastic cutting bit at high RPM and smothed it with a sanding bit . Then put on your door edge.