Correct Steps to burp cooling system...

nychayabusa

Registered
Just wanted to confirm before I do it Sat. I will let the bike cool over night before doing this. I know I must have something wrong. ???

1. Remove radiator cap.
2. Rock bike from side to side a few times.
3. Check coolant level and refill if not topped off.

Thanks!!
 
Last edited:
yeah squeeze the hoses and take your time.. It takes a few tries. Run it at idle and let the fan kick on a few times before you are sure its good. The temp gauge shouldnt go much past the mid line.
 
I'm getting ready to swap mine coolant for water wetter so this is good info.
 
Back
Top