Clutch Switch

[GSXRFANN]

Is the clutch switch adjustable at all? I just installed a 2-step, but my dang clutch lever doesn't travel far at all before the 2-step releases my rpm's.
I am scared that when I try to launch, my bike will go to 100% throttle before I even start moving...thus, causing me to flip my bike!!
I have been looking at the clutch system MPS has that kind of acts like a slider clutch. It slowly allows the clutch lever to release at slow rate. I can't find a used one and can't afford a new one.

Any suggestions??

 

[NIGHTFLIGHT]

This what I use but im also useing a delay timer and leaving off a button

Clutch Release, Hydraulic - MPS * Schnitz Motorsports Inc

http://tinypic.com/r/w0l2mr/5

 

[GSXRFANN]

This what I use but im also useing a delay timer and leaving off a button

Clutch Release, Hydraulic - MPS * Schnitz Motorsports Inc

Video - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting

That is exactly what I am talking about!! I just can't find a used one anywhere! Heck, I have already spent my money on the 2-step and a paint job and I am low on cash, but don't know where to look for one of these used!!

 

[Professor]

Modify your stock switch. It will work! I'll find some pictures.

 

[Professor]

Here you go

Open the hole and file the numb in the direction you want to move it. Then it is adjustable!

 

[GSXRFANN]

Here you go

Open the hole and file the numb in the direction you want to move it. Then it is adjustable!

I am at a loss on that one Professor. Can you go into more detail?

 

[GSXRFANN]

bump

 

[Professor]

You can modify the stock switch so that you can adjust the point where the contact makes/breaks. Look at yours pull the screw out and look closely at it and compare with the one I modified.

 

[GSXRFANN]

I will have to do that. I need to pull the switch anyway. I wonder if there is a different micro-switch that can be used that is adjustable???

 

[AsleepAtTheTree]

Here you go

Open the hole and file the numb in the direction you want to move it. Then it is adjustable!

View attachment 143110

@Professor how well did this work for you, any advise or recommendations, need this done asap

Thanks

 

[rubbersidedown]

@Professor how well did this work for you, any advise or recommendations, need this done asap

He hasn';t been around in 3 years.