Ok I have an 05 busa love these things. Any ways I bought it used and an issue with the shifting forks (supposedly). Took it apart replaced them which they needed to be. The symptoms were it would jump at about 4k in 2nd and 3rd. So after I replaced it the jumps were not as bad but it was still happening so then i looked into replacing the friction plates on it and some stronger springs so I put it all back together and now when it goes into gear it acts like the clutch isn't pulled in and it jumps right into gear. So i bled the clutch and still does it to see if that would fix the issue nope. So i pulled it all back apart and put old springs back on put it all back together and it still does it. When the clutch is pulled you can see the plate move out but still acts as if it is still engaged. Does anyone have any idea cause i am clueless. Oh yeah i did take the actual clutch plates used 180 grain sand paper to take the glaze off then rinsed in oil and wiped off. Please any advice would be great appreciated. Also have an issue with my neutral light my bike goes into neutral but wont register so the light wont come on. I replace the sensor its plugged in but to no avail will the light come on any ideas?