Hello all, new to the forum.
I have a 2004 and I'm experiencing quite a bit of clutch slippage.
I have taken a look at the clutch drive and driven plates and they do not appear to be in bad shape, neither appear worn or warped. (Have not checked them with calipers yet)
Would weakening springs alone cause this?
I noticed there appears to be a LOT of slop in the drive/driven cams. Rotating counter and clockwise not so much but if I wiggle it frontwards/backwards there seems to be a ton of slop.
Is this normal?
I have not had the bike to the track.
Any help would be greatly appreciated.
I have a 2004 and I'm experiencing quite a bit of clutch slippage.
I have taken a look at the clutch drive and driven plates and they do not appear to be in bad shape, neither appear worn or warped. (Have not checked them with calipers yet)
Would weakening springs alone cause this?
I noticed there appears to be a LOT of slop in the drive/driven cams. Rotating counter and clockwise not so much but if I wiggle it frontwards/backwards there seems to be a ton of slop.
Is this normal?
I have not had the bike to the track.
Any help would be greatly appreciated.