Busa Problems...help

[BusaGuy77]

hi can anyone tell me why my busa would roll freely in all gears. im thinking maybe clutch issues but im not exactly for sure. please help

 

[WuzzaCBXRider]

More info please. Are you saying that your bike rolls while (in gear) with the clutch lever out?

 

[nosbig]

Also have you done any work on it before this happened? Racing it or doing burn outs?

 

[BBMykey]

Maybe you don't have a chain

 

[fallenarch]

Clutches are pretty simple things. Assuming there is fluid in the MC it should work at least some, although it is possible the MC is not working for some reason (never seen that). Usually you can feel the clutch working or not working even if the clutch itself is damaged or slipping for some reason. For it just not to work at all that's a pretty catastrophic failure for a clutch (and an unlikely one too). Is it possible the transmission isn't actually shifting out of neutral? Did you try several gears to see if maybe you dropped a gear? The clutch actuator is pretty visible with the plastic on it's at the left just in front of the foot peg. Check for fluid. Also see if the MC has fluid. There is an inspection window on the QEM clutch MC or just open it by removing the 2 screws. Look for leaks in the lines. Brake fluid is pretty nasty stuff so if it's leaking it would leave a pretty distinct trail.

If you have fluid, the next step is to undo the line and pull the lever to see if it pumps fluid.