bar end thread size

[tabragg]

does anyone know the thread size of the handle bar ends ? no information during my search. 150 miles away from home and I sat down to order bar end mirrors . its either 6 mm or 8 mm according to the web site . any info would be greatly appreciated .

 

[RedBull]

 

[bigoltool]

Definitely not 8mm

 

[c10]

M6 x 1.0

 

[pashnit]

You da man.
I just brought the old bolt to the hardware store and matched up the threads.

 

[RedBull]

You da man .

I just brought
the old bolt to
the hardware store
and matched up
the threads .

 

[BigBSBusa]

Yes, it is a 6mm.

 

[tabragg]

thanks much !!

 

[ROADTOAD1340]

All of the common standard metric M6 bolts found on the Hayabusa are the 1.00mm pitch thread , from engine covers to bodywork to clipon removable bar pinch bolts and nearly everything else . The M5 are .08mm , the M8 are the 1.25mm pitch , and the M10 are fine pitch 1.25mm pitch . There are some M6 exceptions , such as the airbox M6 self tappers for instance . The M10 standard pitch is universally 1.5mm pitch , but Japanese bikes usually always favor the fine pitch 1,25mm in this size .