Autocom install (Bike to pillion)

[Kamsin]

Hi Guys im going to add to my bike an autocom system for rider to pilion chatting, however i want to hard wire it to the bike as apossed to using the batterys you insert in to the autocom.

i have gone for the top modle so it hard wired only to the bike but not sure what wires to cut in to, the autocom system says use the negative from the battery and then to look for a live feed that is powerd from the ignition ( Not live all the time). Im going to site the autocom under the pillion seat so some thing round there would be best.

As i have not messed with the bike since i got it i have no idea whats what under there, so over to you guys for your help.

Oh yes its a 2008 bike i got this year brand new in May.

Many thanks in advance....

 

[MC MUSTANG]

My recommendation is to pull from the lead to the tail light so that the autocom is on when the ignition is turned

 

[dadofthree]

Exactly

 

[Kamsin]

Cool, will try to locate that wire then.

Many thanks

 

[captain]

Cool, will try to locate that wire then.

Many thanks

Pull the back seat, on the left side of the bike there is a two conductor wire it is wrapped in a protective plastic wrap.

 

[dadofthree]

Pull the back seat, on the left side of the bike there is a two conductor wire it is wrapped in a protective plastic wrap.

Is that for safe modding